Support Forum

Hi.

The strobe off buttons are missing from the touchUI button list. (or I can not find)
Please put it into the list if possible.

And I have a little problem. (TouchUI)
If I slelect first RGBW lamp (led par, led moving head) after select not RGBW (strobe, simple moving head,....) the rgbw value will be reserved. The slider upper position will be 0 lower position will be 255.
If I select first no RGBW lamp for examle strobe after select RGBW lamp the position value is correct.
This is confusing beacause if I push "select all button" the rgbw slider position value will be reserved.
I tried to choose fixture the original list but it is also bad. I do not know whether the fixture is defective or the program.

Thans for the help.

Why you don't create a scene to switch the strobe off and put it on a button?

For your 2nd question: Please post a screenshot to analyze the problem.

Christian thanks for your reply.

1nd strobe off button
If there are strobe low, mid, high why isn't off (on touchUI)? it is easier than create scene

http://www.kephost.com/image/vxPf

2nd reversed/invert value problem
NOK:
http://www.kephost.com/image/vxP1

OK:
http://www.kephost.com/image/vxP5

Thanks a lot

Ok, now I understand. You mean the value is "inverted"? Please use the bugtracker and upload the pictures for illustration. For the strobe button, open a second ticket as a "feature request".

Thanks.

I sent this bug with bug tracker.

I also wonder why there is no "strobe off" button in touchui...

You can do what I did and create a strobe off macro that sits on the lamp panel.. Clunky workaround but it works